Cooroy v3 Top Grain One Piece Leather with White Stitching

Cooroy v3 – updated April 2025 – Limited quantity available.
Take one piece of top grain leather. Shape, glue, fold it and wax stitch along each edge. Simplicity is often the best.
Unburnished edge. Side /edge has a raw finish.
Vintage style, similar to the original ‘Cooroy’ strap but is slightly more finished in appearance.
Stainless brushed buckle.
Leather is  tan brown and may be darker than what appears in images.
V2 and v3 are very similar in appearance. On some batches the leather differs slightly in appearance.

Buckle may vary depending  on availability.

Length /size (appoximate)

Hole piece – 125mm
Buckle piece – 75mm with out buckle, 90mm with buckle attached

Buckle Sizes

same as lug except for odd sizes
4mm buckle prong
20mm lug – 20mm buckle
22mm lug – 22mm buckle
Buckle colour choice -silver, black, gold

Note about adding a clasp: you can use this strap with a clasp but realise that the leather is top grain thick. Threading through the clasp fitment clip to attach prong to your size adjustment hole will be a tight fit. You only have to do this once however when finding your size.

I have fitted clasps to all of the Cooroy straps on most of my large watches, Breitling navi for example and with a little patience you can too.
The majority of clasps accept strap thickness up to 3.5mm. The thickness of the Cooroy leather is 3.8mm’s (approx). 1.8mm (doubled) wrapped at lug and add glue in between = 3.8mm’s thickness approximately. Remember, you only have to get it through and into position once and then it’s done.
Again. it’s a tight fit for a clasp but achievable.  Good luck and hope you enjoy as much as I do.
Rob – Shop manager